Asymmetric Thermal and Water Vapor Transport of Polyester Spacer and Cotton Nonwoven Fabric Assembly
| Autor: | Qing Chen, Dahua Shou, Chao Sun, Bailu Fu, Rong Zheng, Jintu Fan |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2023 |
| Předmět: | |
| Zdroj: | Journal of Natural Fibers, Vol 20, Iss 1 (2023) |
| Druh dokumentu: | article |
| ISSN: | 1544-0478 1544-046X 15440478 |
| DOI: | 10.1080/15440478.2022.2152148 |
| Popis: | Spacer fabric is often used in cushions, footwear, filter material, and other products because of its high air permeability and three-dimensional (3D) structure. However, for practical applications, it is typically combined with other materials. We investigated the thermal properties and water vapor permeability of assembly-combined thicker spacer (16 mm) and various cotton nonwoven fabrics. The assembly-combined lightest nonwoven (30 g/m2) and spacer fabric exhibited the highest thermal resistance, increasing by 66.62% compared with the bare spacer fabric; however, no significant difference was observed when combined with the heaviest woven fabric (60 g/m2). Furthermore, the fabric arrangement during assembly could affect the heat and moisture-transfer efficiencies. The assembly-combined lightest nonwoven (30 g/m2) and spacer fabric under the upward test condition exhibited the highest thermal resistance, highest Clo, lowest heat transfer coefficient, highest insulation ratio, and lowest evaporation resistance among all assemblies. Higher thermal resistance and lower evaporative resistance could benefit physiological comfort. However, the assembly-combined heaviest nonwoven and spacer fabric under the downward test condition exhibited similar thermal resistance to the spacer fabric and the highest evaporation resistance. The asymmetric heat- and moisture-transfer properties of a porous assembly can contribute toward developing new materials for applications in other engineering fields. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|