On the risk of failure to prevent induction motors permanent damage, due to the short available time‐to‐diagnosis of inter‐turn short‐circuit faults
Autor: | Fernando Bento, Amel Adouni, Ananias C. P. Muxiri, Davide S. B. Fonseca, Antonio J. Marques Cardoso |
---|---|
Jazyk: | angličtina |
Rok vydání: | 2021 |
Předmět: | |
Zdroj: | IET Electric Power Applications, Vol 15, Iss 1, Pp 51-62 (2021) |
Druh dokumentu: | article |
ISSN: | 1751-8679 1751-8660 |
DOI: | 10.1049/elp2.12008 |
Popis: | Abstract As one of the most important assets of the industry, it is crucial to fully characterise all failure modes showing potential to degrade the normal operation of induction motors (IMs). One of the failure modes which lacks detailed knowledge and proper diagnostic tools is the inter‐turn short‐circuit (SC) fault. Given the severity of such failure mode, it is pivotal to ensure that incipient fault symptoms are correctly identified, thus preventing critical damages to the IM. Unfortunately, the state‐of‐the‐art does not provide enough data to confirm whether the available diagnostic tools act out in due time to avoid permanent damage to the faulty IM. To evaluate the impacts of this failure mode in the temperature of the stator windings of an IM, this paper presents the results obtained from two alternative thermal models of the same IM, resorting to the lumped parameter thermal network method and to the finite elements method. The results confirm that diagnostic tools reported in the literature might not be effective, failing to correctly diagnose an inter‐turn SC fault and to warrant the lead time required to take actions suitable to prevent permanent damage to the IM. |
Databáze: | Directory of Open Access Journals |
Externí odkaz: |