| Autor: |
Qiaoling Meng, Zhongzhe Chen, Haolun Kang, Zhijia Shen, Hongliu Yu |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Applied Sciences, Vol 13, Iss 16, p 9248 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2076-3417 |
| DOI: |
10.3390/app13169248 |
| Popis: |
Flexure-based compliant mechanisms can be used to achieve bio-imitability and adaptability in the applications of biomedical engineering. However, a nonlinear load-displacement profile increases the design complexity of this type of compliant mechanism, especially when the cross-section of the flexure hinge is not constant. This paper proposes two general analytical models by analyzing the compliance and stress characteristics of the semi-circular notch flexure hinge undergoing large deflections, which is a typical variable cross-section of a flexure hinge, based on the Castigliano’s second theorem and the finite elements analysis method. As a case study for verification, three compliant four-bar linkage mechanisms are designed based on the proposed design approach, the design method proposed by Howell, and the equations proposed by Lobontiu, respectively. The results show that the design accuracy is improved 36% in comparison with designs from Howell and Lobontiu. Finally, a flexure-based artificial finger is designed and manufactured based on the proposed optimization approach. The performance test of the prototype shows that the artificial finger has good bio-imitability and adaptability with respect to joint movements. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
