Hydrodynamic Study in a Cone Bottom Stirred Tank Using Computational Fluid Dynamics

Autor: L. F. Cardona, J. E. Arismendy, G. C. Quintana, H. H. Alzate
Jazyk: angličtina
Rok vydání: 2023
Předmět:
Zdroj: Journal of Applied Fluid Mechanics, Vol 16, Iss 10, Pp 2002-2018 (2023)
Druh dokumentu: article
ISSN: 1735-3572
1735-3645
DOI: 10.47176/jafm.16.10.1724
Popis: Stirred tanks are often used in industrial applications to store and process liquids and solids. However, these systems have become an increasing challenge to improve and optimize these processes. Computational Fluids Dynamics (CFD) simulation predicts complex phenomena as hydrodynamics system performance. An optimal solution is found using an effective mesh scheme and selecting appropriate boundary conditions. This work aims to validate and describe the distribution velocities inside the tank using a rigorous turbulence model. Stirred tank with a diameter of 27 cm and an oval cone tip using a Rushton impeller (radial impeller) and a 4-blade impeller inclined at 45° (axial impeller) are performed. For both cases, hydrodynamics in the bottom tank is analyzed. In addition, the power and the pumping numbers for each impeller are studied. The overall results show that at the tip of the oval cone, the asymmetry in the mesh is improved, and the divergence in the solution is avoided. Also, the cone designer increased the turbulent kinetic energy, which can enhance the mixture process. A decrease in power impeller is shown when the axial type is applied at low Reynolds numbers; however, when the cone is introduced inside the tank and a radial impeller type is used, the impeller power values are increased. The overall results of CFD simulation are compared to experimental data and provide similar values with an absolute deviation below 4.46 %.
Databáze: Directory of Open Access Journals