Assessment of RC Frames for SD Limit State Using Nonlinear Methods of Analysis According to EN 1998-3
| Autor: | Aleksandra Radujković, Đorđe Lađinović, Andrija Rašeta |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2020 |
| Předmět: | |
| Zdroj: | Tehnički Vjesnik, Vol 27, Iss 6, Pp 1870-1878 (2020) |
| Druh dokumentu: | article |
| ISSN: | 1330-3651 1848-6339 |
| DOI: | 10.17559/TV-20190715110928 |
| Popis: | Design of structures in seismically active areas according to EN 1998-1 includes a choice between two ductility classes, medium or high, without conditioning by other parameters or favouring any of them. The behaviour factor q is applied as a global reduction factor of internal forces that would develop in the structure in the event of elastic response. According to EN 1998-3 a seismic assessment is determined by comparing the demands with the corresponding capacities. For ductile element, seismic demand and capacity are expressed in terms of chord rotation. The research in this paper was focused on the study of influence of the design ductility classes, as well as of the design seismic actions and the number of frames storeys, on seismic response of reinforced concrete frames designed according to European codes. Seismic performance evaluation of newly designed code-conforming structures is of interest, in order to identify any potential weaknesses and deficiencies in new structures that are designed with appropriate acceptable level of structural damage in the event of a design earthquake. The considered frames were evaluated for the significant damage limit state, for which the return period corresponds to the designed seismic actions. Nonlinear methods of analysis were used, which are the reference methods for assessing seismic performance. The frames designed for high class ductility manifested more favourable seismic performance and the frames designed for lower seismic action had lower values of demand/capacity ratio. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|