A METHOD FOR EXTRACTING SUBSTATION EQUIPMENT BASED ON UAV LASER SCANNING POINT CLOUDS

Autor: W. Yu, J. Xi, Z. Wu, W. Lei, C. Zhu, T. Tang
Jazyk: angličtina
Rok vydání: 2020
Předmět:
Zdroj: The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Vol XLIV-4-W3-2020, Pp 413-419 (2020)
Druh dokumentu: article
ISSN: 1682-1750
2194-9034
DOI: 10.5194/isprs-archives-XLIV-4-W3-2020-413-2020
Popis: Smart grid construction puts higher demands on the construction of 3D models of substations. However, duo to the complex and diverse structures of substation facilities, it is still a challenge to extract the fine three-dimensional structure of the substation facilities from the massive laser point clouds. To solve this problem, this paper proposes a method for extracting substation equipment from laser scanning point clouds. Firstly, in order to improve the processing efficiency and reduce the noises, the regular voxel grid sampling method is used to down-sample the input point cloud. Furthermore, the multi-scale morphological filtering algorithm is used to segment the point cloud into ground points and non-ground points. Based on the non-ground point cloud data, the substation region is extracted using plane detection in point clouds. Then, for the filtered substation point cloud data, a three-dimensional polygon prism segmentation algorithm based on point dimension feature is proposed to extract the substation equipment. Finally, the substation LiDAR point cloud data collected by the UAV laser scanning system is used to verify the algorithm, and the qualitative and quantitative comparison analysis between the detected results and the manually extracted results are carried out. The experimental results show that the proposed method can accurately extract the substation equipment structure from the laser point cloud data. The results are consistent with the manually extracted results, which demonstrate the great potential of the proposed method in substation extraction and power system 3D modelling applications.
Databáze: Directory of Open Access Journals
Externí odkaz: