| Autor: |
Abdullah Sadık Tazegül, Ömer Sinan Şahin |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Advanced Engineering Letters, Vol 2, Iss 1, Pp 8-14 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2812-9709 |
| DOI: |
10.46793/adeletters.2023.2.1.2 |
| Popis: |
A wafer baking plate is set in wafer ovens, and wafer dough is baked to produce wafer sheets. Since wafer dough contains more than 50% water and is baked in a closed environment, it creates high pressure over time. This pressure puts considerable strain on the wafer baking plate and locking mechanisms and adversely affects the locking mechanism. In this case, it is necessary to calculate the stresses and displacements on the parts by modelling the loads and the boundary conditions specific to the problem for various plate locking mechanisms. This study used the finite element method to calculate and compare the stress and displacement values on two different locking mechanisms of a wafer baking plate. As a result of the analysis, the Von Mises stress value of the butterfly lock mechanism was 34.5% higher than the hook lock mechanism. The displacement value of the hook lock mechanism is 9.5% lower than the butterfly lock mechanism. Since the total contact area of the butterfly lock mechanism is shallow and the Von Mises stress value is higher than the other mechanism, it is predicted that the wear will be higher in continuous operation. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
