| Autor: |
Gang Han, Bo Tan, Fei Cheng, Binhua Wang, Yee-Kwong Leong, Xiaozhi Hu |
| Jazyk: |
angličtina |
| Rok vydání: |
2022 |
| Předmět: |
|
| Zdroj: |
Nano Materials Science, Vol 4, Iss 3, Pp 266-275 (2022) |
| Druh dokumentu: |
article |
| ISSN: |
2589-9651 |
| DOI: |
10.1016/j.nanoms.2021.09.003 |
| Popis: |
This study presents a simple technique for strengthening the adhesive-bond strength between aluminium (Al) substrate and carbon fibre reinforced polymer (CFRP) utilising resin pre-coating (RPC) with carbon nanotubes (CNTs). The CNT-containing RPC solution with 90 wt% acetone and 10 wt% resin (without hardener) was applied onto Al substrates, where micro-/nano-vertical channels had been created by chemical or mechanical surface treatments to accommodate CNTs. RPC was able to fill all micro-/nano-cavities over the Al substrate surface, then CNTs were pulled into those vertical micro-channels by the capillary action generated from acetone evaporation. Normal epoxy adhesive (resin + hardener) was applied after the CNT-containing RPC treatment. CNTs bridging across the interface between the adhesive joint and Al substrate and sealing of micro-/nano-cavities by RPC effectively enhanced the interfacial shear bond strength between the Al substrate and CFRP by 30–100% depending on the Al substrate surface profiles. Al substrates with two different chemical treatments were compared in this study for the effectiveness of CNT interfacial reinforcement. Results from a steel substrate after sandblasting were also included for comparison. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
