Intelligent optimization for a full-sized PDC bit with composite percussive rock breaking drilling
| Autor: | Liping Li, Xuegang Liu, Yu Zhou, Chengshuai Qin, Zhihui Liu, Lige Wang, Chongqiang Zhu, Zizheng Sun |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2023 |
| Předmět: | |
| Zdroj: | Journal of Intelligent Construction, Vol 1, Iss 4, Pp 9180021-9180021 (2023) |
| Druh dokumentu: | article |
| ISSN: | 2958-3861 2958-2652 |
| DOI: | 10.26599/JIC.2023.9180021 |
| Popis: | Intelligent drilling has obtained a lot of attention in mining engineering, oil and gas production, and tunnelling engineering. The optimization of drilling parameters is one of the most important technologies of intelligent drilling while determining the key values to improve the drilling efficiency is still a difficulty. In this paper, we established a composite percussive rock breaking model of a full-size polycrystalline diamond compact (PDC) bit based on the continuous–discontinuous element method (CDEM). The evolution of rock fragmentation under the action of composite impact is analysed by the rock breaking volume and the torque applied on the drill bit during drilling. Based on actual construction, two key parameters, axial impact velocity and impact frequency, affecting the process of composite impact rock breaking were selected, to further investigate their effect on composite impact rock breaking. The fitting curves obtained from the sensitivity analysis of the rock breaking effect under different construction parameters were proposed to guide the intelligent drilling. Furthermore, the construction parameters of a diversion inclined shaft in the #2 construction branch hole of Tiantai Mountain pumped storage power station in Zhejiang Province were collected, which provides validation data for the proposed optimizing theory of the drilling parameters. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|