| Autor: |
Chiara Gastaldi, Emanuele Grossi, Teresa M. Berruti |
| Jazyk: |
angličtina |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
Journal of the Global Power and Propulsion Society, Vol 1, Iss 1 (2017) |
| Druh dokumentu: |
article |
| ISSN: |
2515-3080 |
| DOI: |
10.22261/5D19RH |
| Popis: |
Underplatform dampers (UPDs) are still in use to reduce the vibration amplitude of turbine blades and to shift the position of resonant frequencies. The dynamics of blades with UPDs is nonlinear and the analysis is challenging from both the experimental and the numerical point of view. A key point in obtaining a predictive numerical tool is the choice of the correct contact parameters (contact stiffness and friction coefficient) that are required as input to the contact model. The paper presents different approaches to choose these parameters: the contact stiffness in normal and tangential direction are both calculated and measured. The calculation is based on the analytical models in literature, the measurements are carried out on a dedicated test rig. The friction coefficient is also measured. Test results of the forced response of the same bladed disk with UPDs are available for each blade, they come from an experimental campaign under controlled excitation and centrifugal force. The forced response of the bladed disk is not used as a mean to tune the contact parameters, but rather as a validation tool: the effect of the different choices of contact parameters in the code is highlighted by the comparison of the calculated and experimental forced response of the bladed disk. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
