The Effect of Relative Humidity Dependent Thermal Conductivity on Building Insulation Layer Thickness Optimization
| Autor: | Wen Yang, Guanjie Zhang, Wenfang He, Jiaping Liu |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2022 |
| Předmět: | |
| Zdroj: | Buildings, Vol 12, Iss 11, p 1864 (2022) |
| Druh dokumentu: | article |
| ISSN: | 12111864 2075-5309 |
| DOI: | 10.3390/buildings12111864 |
| Popis: | Optimization of insulation layer thickness is a significant factor in energy-efficient building design. Accurate determination of the thickness of the insulation layer will contribute to building energy conservation. In this study, ten typical cities in five thermal zones were selected, and the external thermal insulation of a typical residential building was taken as the research object. Using the degree day method and the economic model of full life cycle cost analysis, the optimal thickness of seven kinds of building insulation materials under absolute dry conditions, the lowest humidity and the highest humidity of the monthly average of the annual daily average were obtained. In addition, the carbon emission, energy saving and recovery period of materials under different working conditions were further obtained through numerical calculation. The results show that the optimum thickness of seven building insulation materials in ten typical cities under three working conditions is 18.21–346.05 mm. Their carbon emission change rate is between −2.7% and 38.6%, energy saving change rate is between −0.4% and 18.4%, and the payback period growth is within 1.5 years. Among them, polystyrene foam is the material least affected by humidity. It is recommended to be the main building insulation material in high humidity areas. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|