| Autor: |
Dan DOBROTĂ, Mădălin TOMESCU |
| Jazyk: |
angličtina |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
Fiabilitate şi Durabilitate, Vol 2, Iss 20, Pp 31-38 (2017) |
| Druh dokumentu: |
article |
| ISSN: |
1844-640X |
| Popis: |
The role of processing by machining is to generate surfaces that have to meet the requirements imposed by the designer through the execution drawing of the piece. The study aims to analyze how the functional geometry of the tool evolves when lathing with a transverse advance. The technological process of lathing with transverse advance is realized with a variable machining speed, and this also causes a variation of the functional geomtry of the tool. Thus, in the paper was established the optimal construction geometry of a lathe knife that can be used for lathing a piece of a certain diameter. Under these conditions, a correlation was established between the values of the geometrical constructive parameters of the knife used for the transverse lathing and the diameter of the workpiece which can be processed in optimal conditions |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
