| Autor: |
Hyun-Jin Ahn, Kang-Won Kim, Joon-Ho Choi, Eui-Sun Kim, Young-Cheol Lim |
| Jazyk: |
angličtina |
| Rok vydání: |
2016 |
| Předmět: |
|
| Zdroj: |
Energies, Vol 9, Iss 3, p 158 (2016) |
| Druh dokumentu: |
article |
| ISSN: |
1996-1073 |
| DOI: |
10.3390/en9030158 |
| Popis: |
This article describes a rotor making technology for the production of high-efficiency single-phase induction motors (SPIMs) to be used in refrigerator compressors. Rotors can have different aluminum fill factors according to the fabrication method. In order to examine the association between the fill factor and the efficiency of the rotor, we analyzed the distribution of magnetic flux density using the finite element method (FEM). Next, we made prototype rotors by conventional casting methods and by the proposed casting method and compared their fill factors. In addition, SPIMs were made using the rotors, and their efficiencies were measured using a dynamometer. Moreover, the SPIMs were put to use in a compressor, for testing, and for each SPIM the refrigerating capacity of the compressor was measured with a calorimeter. Based on the results of the FEM analysis of the magnetic flux density and the experiments, the reliability and validity of the proposed method were proven. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
