Simple Attenauation Models of Metallic Cables Suitable for G.fast Frequencies
| Autor: | Pavel Lafata |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2015 |
| Předmět: | |
| Zdroj: | Advances in Electrical and Electronic Engineering, Vol 13, Iss 2, Pp 147-155 (2015) |
| Druh dokumentu: | article |
| ISSN: | 1336-1376 1804-3119 12387118 |
| DOI: | 10.15598/aeee.v13i2.1338 |
| Popis: | Recently, a new xDSL successor called G.fast, which can occupy frequencies up to 106 or 212~MHz, has been introduced in ITU-T G.9700 series of recommendations. Moreover, a new model of transmission characteristics suitable for various types of metallic cables has been designed and described as well. The model is based on 9 parameters specified for each type of metallic cable and can provide accurate estimations. However, its complexity together with the number of required parameters makes its practical application questionable, since the most important metallic cable characteristic, the attenuation, can be estimated using much simpler models. Therefore, two innovative attenuation models suitable for frequencies up to 250 MHz were designed and they will be introduced in this paper. The main motivation was to achieve an accurate approximation of attenuation character for various types of metallic cables, while maintaining low mathematical complexity and a number of necessary parameters. Both models were compared with attenuation characteristics measured for variety types of real metallic cables and also with other standard attenuation models. The results are included in this article as well. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|