| Autor: |
Jakub Bryła, Adam Martowicz |
| Jazyk: |
angličtina |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Machines, Vol 9, Iss 8, p 163 (2021) |
| Druh dokumentu: |
article |
| ISSN: |
2075-1702 |
| DOI: |
10.3390/machines9080163 |
| Popis: |
The work deals with the investigation of the variation of the selected 3D printing process properties that originate from the choice of a slicer. Specifically, the main aim of the present study was to assess the induced changes of the kinematic and geometric properties considered by the slicer for the printing process making use of the G-code readings. The paper provides adequate definitions and formulas required to characterize the slicer’s configuration. Next, the selected cases of the process parameters’ changes were studied, primarily taking into account varying layer height and infill. The authors performed a detailed analysis regarding the geometric implications at the mesoscale due to the slicer’s settings. Appropriate modifications of the slicer’s properties were also proposed and verified, making it possible to match the geometric and kinematic characteristics of the printed part. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
