| Autor: |
Li Hu, Zeyi Shen, Xiaojuan Chen, Keyu Hu, Ming Tang, Li Wang |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Metals, Vol 13, Iss 11, p 1806 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2075-4701 |
| DOI: |
10.3390/met13111806 |
| Popis: |
Porous NiTi shape memory alloys (SMAs) possess compatible mechanical properties with human bones and can effectively reduce the risk of stress shielding and stress concentration; therefore, they have been termed promising candidates for orthopedic implants. However, microstructure characteristics of porous NiTi SMAs during plastic deformation have rarely been investigated. The present study aims to specifically investigate microstructure characteristics and the corresponding underlying mechanisms of fabricated porous NiTi SMAs via a conventional sintering (CS) process with NaCl space holder during compressive deformation at room temperature. To realize the aforementioned target, X-ray diffraction (XRD), scanning electron microscope (SEM), electron backscattered diffraction (EBSD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM) are applied in the present study. The results show that the fabricated porous NiTi SMA is 51.8% for porosity, 181.65 μm for the average pore size, and 0.78 μm for the average grain size. Many Ni4Ti3 and NiTi2 phases are formed in the mixed matrix with dominant B2 (NiTi) and some B19′ (NiTi). Severe inhomogeneous deformation happens within compressed specimens, leading to the occurrence of tangled dislocation and shear bands. Microcracks occur within fabricated porous NiTi SMAs at a deformation degree of 9.2%; then, they extend quickly to form macrocracks, which finally results in the failure of regions between pores. The observed nanocrystallization and amorphization around microcrack tips within the 12.5%-deformed sample can be attributed to the relatively small grain size and the grain segmentation effect via statistically stored dislocation (SSD) and geometrically necessary dislocation (GND). |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
