| Autor: |
Steven Cooper |
| Jazyk: |
angličtina |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Acoustics, Vol 3, Iss 2, Pp 364-390 (2021) |
| Druh dokumentu: |
article |
| ISSN: |
2624-599X |
| DOI: |
10.3390/acoustics3020025 |
| Popis: |
The operation of a wind turbine results in a series of pulses where there is a significant instantaneous increase in the amplitude of the pressure signal, dependent upon the wind speed at the turbine blades. The variations in the amplitude of the sound being emitted can be significant at receiver locations both as an audible and inaudible sound. The modulation of the A-weighted amplitude of the acoustic signature for wind turbines is often referred to as “amplitude modulation”. Criteria have been proposed in the UK to define “excessive amplitude modulation”. In a technical sense, the general descriptor for wind turbine amplitude modulation is incorrect. The correct term for the variation of the A-weighted level is modulation of the amplitude. The rate of the modulation of the dB(A) level occurs at the blade pass frequency, which is in the infrasound region. Turbines can exhibit amplitude modulation in the low frequency region. The differences between amplitude modulation and modulation of the amplitude occurring at an infrasound rate are discussed in the context for an environmental assessment of a wind farm with respect to permit conditions and a simplified method of assessment with respect to the Modulation Index. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
