Bearing Capacity of Precast Concrete Joint Micropile Foundations in Embedded Layers: Predictions from Dynamic and Static Load Tests according to ASTM Standards

Autor: Abdulla Omarov, Assel Sarsembayeva, Askar Zhussupbekov, Malika Nurgozhina, Gulshat Tleulenova, Akmaral Yeleussinova, Baizak Isakulov
Jazyk: angličtina
Rok vydání: 2024
Předmět:
Zdroj: Infrastructures, Vol 9, Iss 7, p 104 (2024)
Druh dokumentu: article
ISSN: 2412-3811
DOI: 10.3390/infrastructures9070104
Popis: In this paper, joint precast piles with a cross-section of 400 × 400 mm and a pin-joined connection were considered, and their interaction with the soil of Western Kazakhstan has been analyzed. The following methods were used: assessment of the bearing capacity using the static compression load test (SCLT by ASTM) method, interpretation of the field test data, and the dynamic loading test (DLT) method for driving precast concrete joint piles, including Pile Driving Analyzer (PDA by ASTM) and Control and Provisioning of Wireless Access Points (CAPWAP) methods. According to the results, the composite piles tested by the PDA (by ASTM) method differ by 15 percent compared to the static load method, while the difference between the dynamic DLT (by ASTM) method and the static load (by ASTM) method was only 7 percent. So, according to the results, the alternative dynamic method DLT (by ASTM) is very effective and more accurate compared to other existing methods.
Databáze: Directory of Open Access Journals