Bending and Torsion Fatigue-Testing Machine Developed for Multiaxial Non-Proportional Loading

Autor: Fumio Ogawa, Yusuke Shimizu, Stefano Bressan, Takahiro Morishita, Takamoto Itoh
Jazyk: angličtina
Rok vydání: 2019
Předmět:
Zdroj: Metals, Vol 9, Iss 10, p 1115 (2019)
Druh dokumentu: article
ISSN: 2075-4701
DOI: 10.3390/met9101115
Popis: A new fatigue-testing machine was developed to perform high-cycle multiaxial fatigue tests at 50 Hz, in order to reduce testing time. The developed machine can combine bending and torsion loading and perform fatigue tests at a high frequency, under proportional and non-proportional loading conditions, where the principal stress direction changes during a cycle. The proportional loading is cyclic bending loading, and the non-proportional loading is cyclic, combining bending and reversed torsion loading. In this study, the effectiveness of the testing machine was verified by conducting tests under these loading conditions, using specimens of type 490A hot-rolled steel and type 304 stainless steel. The fatigue life linked to bending loading obtained using the new testing machine was slightly extended compared with that obtained using the conventional fatigue-testing machine. The fatigue life derived as a result of a combination of bending and torsion was comparable to that obtained using the conventional fatigue-testing machine, although a fatigue limit reduction of 100 MPa was observed compared to the former study. The feasibility of tests using the developed multiaxial fatigue-testing machine was confirmed.
Databáze: Directory of Open Access Journals