Optimum and Green Fabrication of MIL-100(Fe) for Crystal Violet Dye Removal from Aqueous Solution
| Autor: | Christian Julius Wijaya, Felycia Edi Soetaredjo, Maria Yuliana, Shella Permatasari Santoso, Sandy Budi Hartono, Wenny Irawaty, Jenni Lie, Jindrayani Nyoo Putro, Chintya Gunarto, Nathania Puspitasari, Suryadi Ismadji, Setiyo Gunawan |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2024 |
| Předmět: | |
| Zdroj: | Indonesian Journal of Chemistry, Vol 24, Iss 5, Pp 1319-1330 (2024) |
| Druh dokumentu: | article |
| ISSN: | 1411-9420 2460-1578 |
| DOI: | 10.22146/ijc.93323 |
| Popis: | MIL-100(Fe) was prepared and subsequently used to remove crystal violet dye from aqueous solutions simulating dye-containing wastewater in the environment. In the future, it is aimed that MIL-100(Fe) can be used in managing dye-containing wastewater in the environment and reducing the negative impacts it can cause. Here, MIL-100(Fe) fabrication needs to be optimized to obtain optimum process conditions, which are environmentally friendly and can produce MIL-100(Fe) with the best characteristics. This study focused on optimizing the fabrication of MIL-100(Fe), which is a type of MOF with good chemical stability, thermal stability, and flexible structure. In this study, the room-temperature fabrication of MIL-100(Fe) was established using a ligand-to-metal molar ratio of 0.95 and an acetic acid concentration of 5.1 vol% for 6.2 h. The optimum MIL-100(Fe) was tested for crystal violet removal and provided an optimum removal capacity of 182.66 ± 3.81 mg/g. Statistical approaches are used to investigate the independent parameters and their interactions contributing to MIL-100(Fe) formation. |
| Databáze: | Directory of Open Access Journals |
| Externí odkaz: |
|