| Autor: |
Jinjin Ha, Yannis P. Korkolis |
| Jazyk: |
angličtina |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Journal of Manufacturing and Materials Processing, Vol 5, Iss 2, p 28 (2021) |
| Druh dokumentu: |
article |
| ISSN: |
2504-4494 |
| DOI: |
10.3390/jmmp5020028 |
| Popis: |
The influence of yield function parameters on hole-expansion (HE) predictions are investigated for an anisotropic AA6022-T4 aluminum sheet. The HE experiment is performed in a fully-instrumented double-action hydraulic press with a flat-headed punch. Full strain fields are measured by a stereo-type digital image correlation (DIC) system. The stress state gradually changes from uniaxial to plane-strain tension to biaxial tension in the radial direction. Besides HE, the plastic anisotropy of AA6022-T4 is characterized by uniaxial tension and plane-strain tension experiments. Uniaxial tension is considered as the most important, since it is the stress state along the hoop direction in the hole. For the finite element (FE) simulation, the Yld2000-2d non-quadratic anisotropic yield function is used with two different parameter sets, calibrated by: (1) uniaxial tension only (termed Calib1) and, (2) both uniaxial and plane-strain tension (Calib2). The strain field predictions show a good agreement with the experiments only for Calib2, which takes into account plane-strain as well uniaxial tension. This indicates the importance of biaxial modes, and in particular plane-strain tension, for the adopted yield function to produce accurate HE simulations. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
