| Autor: |
T. G. Konstantinova, M. M. Andronic, D. A. Baklykov, V. E. Stukalova, D. A. Ezenkova, E. V. Zikiy, M. V. Bashinova, A. A. Solovev, E. S. Lotkov, I. A. Ryzhikov, I. A. Rodionov |
| Jazyk: |
angličtina |
| Rok vydání: |
2023 |
| Předmět: |
|
| Zdroj: |
Scientific Reports, Vol 13, Iss 1, Pp 1-9 (2023) |
| Druh dokumentu: |
article |
| ISSN: |
2045-2322 |
| DOI: |
10.1038/s41598-023-32503-w |
| Popis: |
Abstract Fused silica glass is a material of choice for micromechanical, microfluidic, and optical devices due to its chemical resistance, optical, electrical, and mechanical performance. Wet etching is the key method for fabricating of such microdevices. Protective mask integrity is a big challenge due extremely aggressive properties of etching solution. Here, we propose multilevel microstructures fabrication route based on fused silica deep etching through a stepped mask. First, we provide an analysis of a fused silica dissolution mechanism in buffered oxide etching (BOE) solution and calculate the main fluoride fractions like $${HF}_{2}^{-}$$ HF 2 - , $${F}^{-}$$ F - , $${(HF)}_{2}$$ ( H F ) 2 as a function of pH and NH4F:HF ratio. Then, we experimentally investigate the influence of BOE composition (1:1–14:1) on the mask resistance, etch rate and profile isotropy during deep etching through a metal/photoresist mask. Finally, we demonstrate a high-quality multilevel over-200 μm etching process with the rate up to 3 μm/min, which could be of a great interest for advanced microdevices with flexure suspensions, inertial masses, microchannels, and through-wafer holes. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
