| Autor: |
Paola Elizabeth Rodríguez-Ocampo, Michael Ring, Jassiel Vladimir Hernández-Fontes, Juan Carlos Alcérreca-Huerta, Edgar Mendoza, Rodolfo Silva |
| Jazyk: |
angličtina |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
Water, Vol 12, Iss 9, p 2581 (2020) |
| Druh dokumentu: |
article |
| ISSN: |
2073-4441 |
| DOI: |
10.3390/w12092581 |
| Popis: |
The incorporation of new equations to extend the applicability of open-source computational fluid dynamics (CFD) software according to the user’s needs must be complemented with code verification and validation with a representative case. This paper presents the development and validation of an OpenFOAM®-based solver suitable for simulating multiphase fluid flow considering three fluid phases with different densities and temperatures, i.e., two miscible liquids and air. A benchmark “dam-break” experiment was performed to validate the solver. Ten thermistors measured temperature variations in different locations of the experimental model and the temperature time series were compared against those of numerical probes in analogous locations. The accuracy of the temperature field assessment considered three different turbulence models: (a) zero-equation, (b) k-omega (Reynolds averaged simulation; RAS), and (c) large eddy simulation (LES). The simulations exhibit a maximum time-average relative and absolute errors of 9.3% and 3.1 K, respectively; thus, the validation tests proved to achieve an adequate performance of the numerical model. The solver developed can be applied in the modeling of thermal discharges into water bodies. |
| Databáze: |
Directory of Open Access Journals |
| Externí odkaz: |
|
