| Autor: |
Lin, Xiang, Xia, Qi, Qiu, Peng, Liang, Yurong, Yan, Hao |
| Rok vydání: |
2024 |
| Předmět: |
|
| Druh dokumentu: |
Working Paper |
| Popis: |
Tilt-to-length (TTL) coupling, caused by the jitter of test masses or satellites, is a significant noise source in space-based gravitational wave detection. Calibrating and suppressing TTL coupling noise at the sub-nanometer level is essential. One main challenge in current ground-based TTL coupling testing is the residual translational movement of the tilt actuator. This paper introduces the development of an advanced pure tilt actuator (APTA) specifically designed for testing TTL coupling. The APTA provides precise tilt motion and is monitored by a four-beam interferometer, which measures the displacement of attached array pyramids. We present a detailed theoretical model and experimental setup. Experimental results demonstrate that this optical test bed, equipped with the APTA, can achieve subnanometer-level TTL coupling calibration. In addition, a typical heterodyne interferometer was tested using the APTA test bed. Comparative testing demonstrated that the imaging system is capable of effectively suppressing TTL coupling errors. The TTL coupling coefficients were reduced from over plus-minus 30 micrometers per radian to within plus-minus 5 micrometers per radian across a range of plus-minus 200 microradians, meeting the preliminary requirements for the TianQin mission. This APTA test platform has the potential to be widely utilized for ground-based TTL coupling inspection. |
| Databáze: |
arXiv |
| Externí odkaz: |
|
