Gas selection for Xe-based LCP-GEM detectors onboard the CubeSat X-ray observatory NinjaSat

Autor: Takeda, T., Tamagawa, T., Enoto, T., Kitaguchi, T., Kato, Y., Mihara, T., Iwakiri, W., Numazawa, M., Zhou, Y., Uchiyama, K., Yoshida, Y., Ota, N., Hayashi, S., Watanabe, S., Jujo, A., Sato, H., Hu, C. P., Takahashi, H., Odaka, H., Tamba, T., Taniguchi, K.
Rok vydání: 2023
Předmět:
Druh dokumentu: Working Paper
DOI: 10.1088/1748-0221/18/06/C06020
Popis: We present a gas selection for Xe-based gas electron multiplier (GEM) detectors, Gas Multiplier Counters (GMCs) onboard the CubeSat X-ray observatory NinjaSat. To achieve an energy bandpass of 2-50 keV, we decided to use a Xe-based gas mixture at a pressure of 1.2 atm that is sensitive to high-energy X-rays. In addition, an effective gain of over 300 is required for a single GEM so that the 2 keV X-ray signal can be sufficiently larger than the electrical noise. At first, we measured the effective gains of GEM in nine Xe-based gas mixtures (combinations of Xe, Ar, CO2, CH4, and dimethyl ether; DME) at 1.0 atm. The highest gains were obtained with Xe/Ar/DME mixtures, while relatively lower gains were obtained with Xe/Ar/CO2, Xe/Ar/CH4, and Xe+quencher mixtures. Based on these results, we selected the Xe/Ar/DME (75%/24%/1%) mixture at 1.2 atm as the sealed gas for GMC. Then we investigated the dependence of an effective gain on the electric fields in the drift and induction gaps ranging from 100-650 V cm$^{-1}$ and 500-5000 V cm$^{-1}$, respectively, in the selected gas mixture. The effective gain weakly depended on the drift field while it was almost linearly proportional to the induction field: 2.4 times higher at 5000 V cm$^{-1}$ than at 1000 V cm$^{-1}$. With the optimal induction and drift fields, the flight model GMC achieves an effective gain of 460 with an applied GEM voltage of 590 V.
Comment: 7th international conference on Micro Pattern Gaseous Detectors 2022 - MPGD2022, 3 pages, 2 figures
Databáze: arXiv
Externí odkaz: