Unsteadiness in hypersonic leading-edge separation
| Autor: | Karthick, S. K., Nanda, Soumya R., Cohen, J. |
|---|---|
| Rok vydání: | 2022 |
| Předmět: | |
| Druh dokumentu: | Working Paper |
| DOI: | 10.1007/s00348-022-03559-7 |
| Popis: | Hypersonic leading-edge separation is studied towards understanding the varying shock-related unsteadiness with freestream Reynolds number ($1.66 \times 10^5 \leq Re_D \leq 5.85 \times 10^5$) in the newly constructed hypersonic Ludwieg tunnel (HLT) at a freestream design Mach number of $M_\infty=6.0$. An axisymmetric flat-face cylinder of base body diameter $D=35$ mm is fitted with protrusions of different fineness ($d/D=0.1,0.2,0.26,0.34$ at $L/D=1.4$) and slenderness ($L/D=0.7,1,1.4,1.9$ at $d/D=0.2$) ratio to induce a wide range of leading-edge separation intensities. Qualitative and quantitative assessments are made using schlieren imaging, planar laser Rayleigh scattering, and unsteady pressure measurements. A well-known to-and-fro shock motion called pulsation and a flapping shock-shear layer oscillation is observed as $Re_D$ changes. A shorter protrusion length ($L/D=0.7$) produces a pressure loading that is four orders higher than the cases with longer protrusion lengths. There exists a critical separation length ($L/D \geq 1.4$) beyond which the separated shear layer trips to turbulence and introduces fluctuations in the recirculation region as $Re_D$ increases. The effect of the separated turbulent shear layer is dampened by an order provided the reattachment angle is shallow by increasing the fineness ratio ($d/D=0.4$). There also exists a critical geometrical parameter ($L/D=1, d/D=0.2$) for which the unsteady modes switch between successive runs based on the upstream fluctuations. From the modal analysis of the Rayleigh scattering images, the first four dominant modes that drive flapping are identified as translatory flapping, sinuous flapping, large and small-scale shedding. Comment: 19 Figures. Relevant multimedia views and supplementary videos are embedded in the pdf itself. The article is yet to be submitted to a journal |
| Databáze: | arXiv |
| Externí odkaz: |
|