Electrochemical Degradation of Per- and Polyfluoroalkyl Substances (PFAS) using Low-cost Graphene Sponge Electrodes
| Autor: | Duinslaeger, Nick, Radjenovic, Jelena |
|---|---|
| Rok vydání: | 2022 |
| Předmět: | |
| Druh dokumentu: | Working Paper |
| DOI: | 10.1016/j.watres.2022.118148 |
| Popis: | Boron-doped, graphene sponge anode was synthesized and applied for the electrochemical oxidation of C4-C8 per and polyfluoroalkyl substances (PFASs). Removal efficiencies, obtained in low conductivity electrolyte (1 mS cm-1) and one-pass flow-through mode, were in the range 16.7-67% at 230 A m-2 of anodic current density, and with the energy consumption of 10.1+-0.7 kWh m-3. Their removal was attributed to electrosorption (7.4-35%), and electrooxidation (9.3-32 %). Defluorination efficiencies of C4-C8 perfluoroalkyl sulfonates and acids were 8-24% due to a fraction of PFAS being electrosorbed only at the anode surface. Yet, the recovery of fluoride was 74-87% relative to the electrooxidized fraction, suggesting that once the degradation of the PFAS is initiated, the C-F bond cleavage is very efficient. The nearly stoichiometric sulfate recoveries obtained for perfluoroalkyl sulfonates (91-98%) relative to the electrooxidized fraction demonstrated an efficient cleavage of the sulfonate head-group. Adsorbable organic fluoride (AOF) analysis showed that the remaining partially defluorinated byproducts are electrosorbed at the graphene sponge anode during current application and are released into the solution after the current is switched off. This proof-of-concept study demonstrated that the developed graphene sponge anode is capable of C-F bond cleavage and defluorination of PFAS. Given that the graphene sponge anode is electrochemically inert towards chloride and does not form any chlorate and perchlorate even in brackish solutions, the developed material may unlock the electrochemical degradation of PFAS complex wastewaters and brines. Comment: 31 pages, 3 figures, 1 table |
| Databáze: | arXiv |
| Externí odkaz: |
|