Physical and Mechanical Properties of Cu-Fe System Functionally Graded and Multimaterial Structures after the DED
| Autor: | Makarenko, Konstantin, Dubinin, Oleg, Konev, Stepan, Shishkovsky, Igor |
|---|---|
| Rok vydání: | 2021 |
| Předmět: | |
| Druh dokumentu: | Working Paper |
| Popis: | This paper is devoted to experimental characterisation of linear thermal expansion coefficient (LTEC) and mechanical characteristics of the laser deposited Cu-Fe system multilayer functionally graded (FG) structures and binary Cu-Fe alloys, fabricated from the tin, aluminium, and chromium bronze with 89-99 wt.% of copper and stainless steel (SS) AISI 316L with 1:1 and 3:1 bronze-to-steel ratio. The best tensile mechanical strength of as-built parts is demonstrated by the aluminium bronze-stainless steel 1:1 alloy and reaches 876.4 MPa along with low elasticity modulus (11.2 GPa) and 1.684 1/K LTEC. Contrarily, the worst values of the mechanical characteristics are exhibited by parts created from the chromium bronze and SS, which failed at 294.0-463.3 MPa ultimate stress, showed the highest elasticity modulus (up to 42.4 GPa) and comparatively high average LTEC (up to 1.878 1/K). The aluminium bronze-stainless steel binary and FG alloys are discussed in the light of prospective application as the part of gradient materials, created by additive manufacturing (AM) technologies via the gradient path method and the alternating layers technique, with expected possibility of application in aerospace, nuclear, and electronic industry due to advantageous combination of the antifrictionality, heat conductivity, and oxidation resistance of the bronze, and the high mechanical strength, corrosion and creep resistance of the stainless steel. Comment: 72 pages, 44 figures |
| Databáze: | arXiv |
| Externí odkaz: |
|