Elastomeric focusing enables application of hydraulic principles to solid materials in order to create micromechanical actuators with giant displacements
| Autor: | Cira, Nate J, Khoo, Jason W, Jain, Mika, Andraka, Jack T, Paull, Morgan L, Thomas, Amber L, Aliado, Kevin, Viergever, Chad, Yu, Feiqiao, Li, Jonathan B, Nguyen, Canh T, Robles, Michael, Araci, Ismail E, Quake, Stephen R |
|---|---|
| Rok vydání: | 2017 |
| Předmět: | |
| Druh dokumentu: | Working Paper |
| Popis: | A continuing challenge in material science is how to create active materials in which shape changes or displacements can be generated electrically or thermally. Here we borrow principles from hydraulics, in particular that confined geometries can be used to focus expansion into large displacements, to create solid materials with amplified shape changes. Specifically, we confined an elastomeric poly(dimethylsiloxane) sheet between two more rigid layers and caused focused expansion into embossed channels by local resistive heating, resulting in a 10x greater relative displacement than the unconfined geometry. We used this effect to create electrically controlled microfluidic valves that open and close in less than 100 ms, can cycle >10,000 times, and operate with as little as 20 mW of power. We investigate this mechanism and establish design rules by varying dimensions, configurations, and materials. We show the generality of elastomeric focusing by creating additional devices where local heating and expansion are generated either wirelessly through inductive coupling or optically with a laser, allowing arbitrary and dynamic positioning of a microfluidic valve along the channels. Comment: 9 pages, 4 figures, and supplemental material |
| Databáze: | arXiv |
| Externí odkaz: |
|