| Autor: |
Maddalena, Lorenza, Carosio, Federico, Gomez, Julio, Saracco, Guido, Fina, Alberto |
| Rok vydání: |
2017 |
| Předmět: |
|
| Zdroj: |
Polymer Degradation and Stability, Volume 152, June 2018, Pages 1-9 |
| Druh dokumentu: |
Working Paper |
| DOI: |
10.1016/j.polymdegradstab.2018.03.013 |
| Popis: |
The layer-by-layer (LbL) technique is adopted for the construction of multilayers encompassing chitosan and graphene oxide (GO) platelets capable of improving the flame retardant properties open cell PU foams. The LbL assembly follows a linear growth regime as evaluated by infrared spectroscopy and yields a multilayer structure where GO platelets are embedded within a chitosan continuous matrix. 3 and 6 bi-layers (BL) can efficiently coat the complex 3D structure of the foam and substantially improve its flame retardant properties. 3BL only add 10% to the original mass and can suppress the melt dripping during flammability and reduce both the peak of heat release rate by 54% and the total smoke released by 59% in forced combustion tests. Unprecedented among other LbL assemblies employed for FR purposes, the deposition 6BL is capable of slowing down the release of combustible volatile to the limits of non-ignitability thus preventing ignition in half of the specimens during cone calorimetry tests. This has been ascribed to the formation of a protective coating where the thermally stable char produced by chitosan serves as a continuous matrix embedding GO platelets, which control volatile release while mechanically sustaining the PU foam structure. |
| Databáze: |
arXiv |
| Externí odkaz: |
|
