| Autor: |
Pawar, Pallavi, Joo, Hee, Callegari, Gerardo, Drazer, German, Cuitino, Alberto M., Muzzio, Fernando J. |
| Rok vydání: |
2016 |
| Předmět: |
|
| Zdroj: |
Powder Tech. 301 (2016) 657-664 |
| Druh dokumentu: |
Working Paper |
| DOI: |
10.1016/j.powtec.2016.05.058 |
| Popis: |
A full factorial design of experiments was used to study the effect of blend shear strain on the compaction process, relative density and strength of pharmaceutical tablets. The powder blends were subjected to different shear strain levels (integral of shear rate with respect to time) using an ad hoc Couette shear cell. Tablets were compressed at different compaction forces using an instrumented compactor simulator, and compaction curves showing the force-displacement profiles during compaction were obtained. Although the die-fill blend porosity (initial porosity) and the minimum in-die tablet porosity (at maximum compaction) decreased significantly with shear strain, the final tablet porosity was surprisingly independent of shear strain. The increase in the in-die maximum compaction with shear strain was, in fact, compensated during post-compaction relaxation of the tables, which also increased significantly with shear strain. Therefore, tablet porosity alone was not sufficient to predict tablet tensile strength. A decrease in the 'work of compaction' as a function of shear strain, and an increase in the recovered elastic work was observed, which suggested weaker particle-particle bonding as the shear strain increased. For each shear strain level, the Ryskewitch Duckworth equation was a good fit to the tensile strength as a function of tablet porosity, and the obtained asymptotic tensile strength at zero porosity exhibited a 60% reduction as a function of shear strain. This was consistent with a reduced bonding efficiency as the shear strain increased. |
| Databáze: |
arXiv |
| Externí odkaz: |
|
