Effect of Nb on β → α″ Martensitic Phase Transformation and Characterization of New Biomedical Ti-xNb-3Fe-9Zr Alloys

Autor: Jawed, Syed Faraz, Rabadia, Chirag Dhirajlal, Azim, Fahad, Khan, Saad Jawaid
Jazyk: angličtina
Rok vydání: 2021
Předmět:
Zdroj: Scanning
Scanning, Vol 2021 (2021)
ISSN: 1932-8745
0161-0457
Popis: A new generation of Ti-xNb-3Fe-9Zr (x = 15, 20, 25, 30, 35 wt %) alloys have been designed using various theoretical approaches including DV-xα cluster, molybdenum equivalency, and electron to atom ratio. Afterward, designed alloys are fabricated using cold crucible levitation melting technique. The microstructure and mechanical performances of newly designed alloys are characterized in this work using scanning electron microscope and universal testing machine, respectively. Each alloy demonstrates monolithic β phase except Ti-35Nb-3Fe-9Zr alloy which display dual α″ + β phases. Typically, niobium acts as an isomorphous beta stabilizer. However, in this work, formation of martensitic α″ phases occurs at 35 wt % of niobium among the series of newly designed alloys. Furthermore, none of the alloys fail till the maximum load capacity of machine, i.e., 100 KN except Ti-35Nb-3Fe-9Zr alloy. Moreover, the Vickers hardness test is carried out on Ti-xNb-3Fe-9Zr alloys which demonstrate slip bands around the indentation for each alloy. Notably, the deformation bands and cracks around the indentations of each alloy have been observed using optical microscopy; Ti-35Nb-3Fe-9Zr demonstrates some cracks along with slip bands around its indentation. The Ti-25Nb-3Fe-9Zr alloy shows the highest yield strength of 1043 ± 20 MPa, large plasticity of 32 ± 0.5%, and adequate hardness of 152 ± 3.90 Hv among the investigated alloys. The Ti-25Nb-3Fe-9Zr alloy demonstrates good blend of strength and malleability. Therefore, Ti-25Nb-3Fe-9Zr can be used effectively for the biomedical applications.
Databáze: OpenAIRE
Externí odkaz: