Cement thickness at implant-supported single-tooth Lava assemblies: a scanning electron microscopic investigation
| Autor: | Apicella, D, Veltri, Mario, Chieffi, N, Balleri, Piero, Ferrari, Marco |
|---|---|
| Rok vydání: | 2010 |
| Předmět: |
Dental Stress Analysis
Titanium Analysis of Variance Crowns Surface Properties Cement Dental Abutments Dental Marginal Adaptation Dental Porcelain Resin Cements Random Allocation Dental Implants Single-Tooth Dental Prosthesis Design Materials Testing Microscopy Electron Scanning Abutment Cement Zirconia Zirconia Dental Prosthesis Implant-Supported Zirconium Abutment Cementation |
| Zdroj: | Clinical oral implants research. 21(7) |
| ISSN: | 1600-0501 |
| Popis: | The fit of implant-supported single-tooth Lava zirconia assemblies was investigated in this study. The implant-abutment interface, the interface between the metallic and the zirconia portion of the abutment and the interface between Lava abutments and copings were evaluated. The adaptation of titanium abutments to implants and Lava copings was investigated as a control.Twenty implants were randomly assigned and connected to Lava abutments (group 1) or titanium abutments (group 2). All specimens were subjected to scanning electron microscopy (SEM) analysis of the fixture/abutment fit. Afterwards, specimens were luted to Lava copings and subjected to a SEM evaluation of the marginal external adaptation of the abutments with the copings. Finally, the samples were embedded in resin, sectioned and subjected to SEM analysis of the following interfaces; group 1: titanium/zirconia interface (between the constitutive components of the Lava abutment) and the zirconia/zirconia interface (between the Lava abutment and the coping); group 2: the titanium/zirconia interface (between the titanium abutment and the Lava coping). Non-parametric analysis of variance and a post hoc test were used for statistical analysis.Significant differences emerged in the cement thickness between titanium and zirconia components of the Lava abutments as compared with the thickness measured at the interface between Lava copings and the abutments investigated. No differences were found in cement thickness between Lava copings and the two different abutments.When Lava abutments are used, the most critical cement thickness is the internal interface between its titanium and zirconia components. Lava coping adaptation for both Lava and titanium abutments is within the clinical acceptable range. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Plný text