Fast and inexpensive detection of total and extractable element concentrations in aquatic sediments using near-infrared reflectance spectroscopy (NIRS)

Autor: Kleinebecker, Till, Poelen, Moni D. M., Smolders, Alfons J. P., Lamers, Leon P. M., Hölzel, Norbert
Jazyk: angličtina
Rok vydání: 2013
Předmět:
Zdroj: PLoS ONE, Vol 8, Iss 7, p e70517 (2013)
PLoS ONE
ISSN: 1932-6203
Popis: Adequate biogeochemical characterization and monitoring of aquatic ecosystems, both for scientific purposes and for water management, pose high demands on spatial and temporal replication of chemical analyses. Near-infrared reflectance spectroscopy (NIRS) may offer a rapid, low-cost and reproducible alternative to standard analytical sample processing (digestion or extraction) and measuring techniques used for the chemical characterization of aquatic sediments. We analyzed a total of 191 sediment samples for total and NaCl-extractable concentrations of Al, Ca, Fe, K, Mg, Mn, N, Na, P, S, Si, and Zn as well as oxalate- extractable concentrations of Al, Fe, Mn and P. Based on the NIR spectral data and the reference values, calibration models for the prediction of element concentrations in unknown samples were developed and tested with an external validation procedure. Except Mn, all prediction models of total element concentrations were found to be acceptable to excellent (ratio of performance deviation: RPD 1.8-3.1). For extractable element fractions, viable model precision could be achieved for NaCl-extractable Ca, K, Mg, NH4 (+)-N, S and Si (RPD 1.7-2.2) and oxalate-extractable Al, Fe and P (RPD 1.9-2.3). For those elements that showed maximum total values below 3 g kg(-1) prediction models were found to become increasingly critical (RPD
Databáze: OpenAIRE