The Effect of Severe Shot Peening on Fatigue Life of Laser Powder Bed Fusion Manufactured 316L Stainless Steel

Autor:	Timo, Rautio, Matias, Jaskari, Tejas, Gundgire, Terho, Iso-Junno, Minnamari, Vippola, Antti, Järvenpää
Rok vydání:	2022
Zdroj:	Materials (Basel, Switzerland). 15(10)
ISSN:	1996-1944
Popis:	Severe shot peening (SSP) was used on additive manufactured 316L by laser powder bed fusion. The effect of the post processing on the surface features of the material was analyzed through residual stress measurements, tensile testing, hardness-depth profiles, and fatigue testing by flexural bending. The results showed that SSP can be utilized to form residual stresses up to -400 MPa 200 μm below the surface. At the same time, a clear improvement on the surface hardness was achieved from 275 HV to near 650 HV. These together resulted in a clear improvement on material strength which was recorded at 10% improvement in ultimate tensile strength. Most significantly, the fatigue limit of the material was tripled from 200 MPa to over 600 MPa and the overall fatigue strength raised similarly from a low to high cycle regime.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=pmid________::469b7ea122c20b7ebe8aa8017cc64109 https://pubmed.ncbi.nlm.nih.gov/35629543 Zobrazit plný text záznamu Plný text ve formátu PDF Plný text ve formátu HTML
Nepřihlášeným uživatelům se plný text nezobrazuje	K zobrazení výsledku je třeba se přihlásit.