| Popis: |
In a fast growing world with increasing demand on resources like high-tech metals as In, Ga, Ge, or rare earth elements (REE), mineralogists and economic geologists need faster and automated analytical tools to explore mineral deposits, make them accessible and define necessary initial data for all subsequent processing steps. Next to the necessary knowledge in which phases the elements of interest, ecotoxical as well as deleterious elements are concentrated, it is important to determine structural parameters like grain sizes and possible intergrowths relations of these minerals. These are typical geometallurgical analytical tasks, which are so far routinely performed by electron beam based methods of automated mineralogy, like MLA (mineral liberation analysis) or QEMSCAN, with their advantages and disadvantages. The methodological problems of these type of methods are, for example, the necessary measurement time, insufficient limits of detection (no trace element detection) and high background (electron Bremsstrahlung). Some of these hurdles can be overcome by using alternative excitation radiation, like ions, known as particle-induced X-ray emission (PIXE) or X-rays, known as X-ray fluorescence (XRF). Combining these with a full-field detection system, such as the so-called SLcam®[1], allows the determination of trace element distributions in reasonable time over a large field of view. The SLcam® consists of a 12 x 12 mm², X-ray sensitive pnCCD chip with 69696 pixels. A high read-out speed of up to 1000 Hz, allows the acquisition of complete X-ray spectra (2-20 keV) on each pixel simultaneously, with an energy resolution of around 160 eV (@ Mn-K even for high photon fluxes. A poly-capillary lens is used to guide the X-rays from their point of origin on the sample to the corresponding pixel on the detector-chip. Usage of a straight 1:1 lens results in a lateral resolution better than 100 µm. The MEGA spectrometer is equipped with a laboratory-scale X-ray tube. XRF is used for the determination of major and trace element data. It’s “small”, table-top like size would in principle allow to use the set-up directly at the mining site. The so called High-Speed PIXE[2] uses a broad proton beam to excite the fluorescence radiation. Samples with a total weight of up to 10 kg and a maximum size 25 x 25 x 2.5 cm³ can be mounted in a dedicated vacuum sample chamber. The instrument is installed at the Ion Beam Center at the Helmholtz-Zentrum Dresden-Rossendorf. The advantages and disadvantages of both instruments will be presented, as well as first results of combined qualitative studies of the distribution of trace elements in representative samples to demonstrate the importance of these innovative concepts for geometallurgical research. [1] Scharf, O., et al. (2011). Compact pnCCD-Based X-ray Camera with High Spatial and Energy Resolution: A Color X-ray Camera. Analytical Chemistry, 83(7), 2532–2538. [2] Hanf, D., et al. (2016). A new particle-induced X-ray emission set-up for laterally resolved analysis over wide areas. Nuclear Instruments and Methods in Physics Research B, 377, 7-24. |
