| Autor: |
Kutnjak, Filip |
| Přispěvatelé: |
Pelin, Denis, Biondić, Ivan |
| Jazyk: |
chorvatština |
| Rok vydání: |
2016 |
| Předmět: |
|
| Popis: |
Napravljena je rekonstrukcija makete odnosno za istu je izrađeno kućište s izvedenim priključcima za mjerne točke. Maketa je prilagođena upotrebi za laboratorijske vježbe u idućoj akademskoj godini. Provedena je analiza rada te su određeni karakteristični valni oblici napona i struja koji se mogu očekivati kao rezultati mjerenja. Mjerenja su vršena s djelatno-induktivnim opterećenjem za karakteristične kutove upravljanja. Dorađen je predložak za laboratorijsku vježbu 4 „Upravljivi ispravljači“. U vježbi je dana teorijska analiza rada ispravljača u jednofaznom mosnom spoju, opisan je fizički model pretvarača te je dan postupak provođenja vježbe kao i zadaci za pripremu i analizu rezultata. A reconctruction of the model with the construction of an appropriate casing was made with derived connections for the measurement points. The model is adapted to the use of laboratory exercises in the next academic year. A work analysis was conducted and typical voltage and current waveforms have been determined that can be expected as the measurements results. The measurements were performed while the rectifier was active-inductive loaded for typical firing angles. The template for the laboratory exercise 4 “Controlled rectifiers” was revised. A theoretical work analysis of the single phase fully controlled rectifier was given and the physical model of the converter was described. Steps for performing the exercise were described and tasks for preparation and results analysis were given. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
