| Popis: |
Titanium alloy Ti6Al4V is one of the most utilized alloys in the field of additive manufacturing due to the excellent combination of mechanical properties, density and good corrosion behavior. These characteristics make the use of this material particularly attractive for additively manufacturing components with complex geometry in sectors such as aeronautics and biomedical. Selective Laser Melting (SLM), by which a component is fabricated by selectively melting of stacked layers of powder using a laser beam, is the one of most promising additive manufacturing technologies for Ti6Al4V alloy. Although this technique offers numerous advantages, it has some critical issues related to the high thermal gradients, associated with the process, promoting the formation of a metastable martensitic microstructure resulting in high tensile strength but poor ductility of the produced parts. The formation of microstructural defects such as balling and porosity can occur together with the presence of residual stresses that may significantly affect the mechanical characteristics of the component. Specific process parameters and geometries can determine heat accumulation phenomena that result in a progressive decrease in thermal gradients between layers. These heat accumulation phenomena are influenced by the number of layers deposited, but also by the building orientation that, for a given geometry, determines a variation of the deposited surface for each layer. © 2022 The Author(s). Published by Trans Tech Publications Ltd, Switzerland. |
