Popis: |
Uvod: Kovinsko porcelanska prevleka je ena izmed najbolj razširjenih fiksno protetičnih restavracij. Sestavljena je iz kovinske konstrukcije, ki je pokrita z dentalnim porcelanom, kar ji daje naravni videz. Lastna cena izdelka nam poda strošek, ki ga ima laboratorij pri izdelavi določenega izdelka. Pri kalkulaciji lastne cene izdelkov je pomembno, da dobro poznamo proces izdelave, saj lahko le tako natančno določimo vse neposredne in posredne stroške, ki nastanejo pri njihovi izdelavi. Namen: Namen diplomskega dela je raziskati nove načine izdelave in jih primerjati s klasično metodo izdelave kovinskega ogrodja, nato pa izračunati lastne cene in jih med seboj primerjati. Metode dela: V uvodnem delu je bila uporabljena deskriptivna metoda dela s pregledom literature na temo diplomskega dela. V rezultatih je predstavljena izdelava treh kovinsko-porcelanskih mostičkov in izračun njihove lastne cene. Rezultati: Predstavljeni so postopki izdelave kovinskega ogrodja po treh tehnologijah izdelave. Med izdelavo je potekala analiza stroškovnih nosilcev, nato pa iz dobljenih podatkov izračunana lastna cena posamezne kovinsko-porcelanske restavracije. Razprava in sklep: Pri analizi podatkov smo ugotovili, da je izdelava kovinsko-porcelanskega mostička z ulitim ogrodjem najcenejša. Lastna cena mostička z ulitim ogrodjem je 144,22 €, in je tako 32 % nižja od mostička z rezkanim ogrodjem (190,11 €), ter 22 % nižja od mostička s SLS ogrodjem (176,40 €). Prav tako smo ugotovili, da računalniško podprta izdelava ogrodja podaljša čas izdelave povprečno za 1-3 dni. Na podlagi izračunanih podatkov smo sklenili, da je računalniško podprta izdelava kovinskega ogrodja pri mostičnih z manjšim razponom neekonomična. Introduction: The metal-ceramic crown is one of the most used fixed dental restorations. It combines a metal alloy frame which is veneered with ceramics for a natural look. The cost price gives us information about the manufacturing cost of a product. It is very important that we know the manufacturing proces well, because it is the only way to accurately determine all direct and indirect costs incured in its production. Purpose: The purpose of this thesis is to explore new ways of metal coping production, compare them to the conventional method and compare calculated cost prices. Methodology: The methods used in this work included a review of literature on the topic of metal-ceramics restorations. In the results, we present three metal-ceramic bridges which we made. Results: Three diferent technologies of metal frame manufacturing are featured. The analysis was carried out during work, then we calculated the cost price of each metal-ceramic restoration. Discussion and conclusion: In the analysis we discovered that the production of a metal-ceramic bridge with molded frames is the most cost effective The cost price of a metal-ceramic bridge with molded frames is 144.22 € and is 32 % cheaper than a metal-ceramic bridge with milled frame (190.11 €), and 22 % cheaper than a metal-ceramic bridge with SLS frame (176.40 €). We also discovered that computerized production extends production time from one to three days on average. From the gathered data we concluded that it is uneconomical to produce metal frames in small metal-ceramic bridges using computerized production. |