Reducing the footprint of vertical flow constructed wetlands for raw sewage treatment: the Bi-filter® solution
| Autor: | Troesch, S., Prost Boucle, S., Molle, Pascal, Leboeuf, V., Esser, D. |
|---|---|
| Přispěvatelé: | Irstea Publications, Migration, EPUR NATURE CAUMONT SUR DURANCE FRA, Partenaires IRSTEA, Institut national de recherche en sciences et technologies pour l'environnement et l'agriculture (IRSTEA)-Institut national de recherche en sciences et technologies pour l'environnement et l'agriculture (IRSTEA), Milieux aquatiques, écologie et pollutions (UR MALY), Centre national du machinisme agricole, du génie rural, des eaux et forêts (CEMAGREF), SOCIETE D'INGENIERIE NATURE ET TECHNIQUE LA CHAPELLE DU MONT DU CHAT FRA |
| Jazyk: | angličtina |
| Rok vydání: | 2010 |
| Předmět: | |
| Zdroj: | 12th International Conference on Wetland Systems for Water Pollution Control 12th International Conference on Wetland Systems for Water Pollution Control, Oct 2010, Venise, Italy. pp.7 |
| Popis: | International audience; French vertical flow constructed wetlands treating raw wastewater have been developed successfully over the last 30 years. During the last years, SINT and Epur Nature developed the approach further by introducing a deep single-stage vertical flow bed that comprises both stages into one in the aim to reduce the footprint. This process, patented by Epur Nature as Bi-filtre®, consists in two vertical stages piled-up. While classical systems in France are designed with 2m².PE-1 (1.2m² and 0.8m² on the first and second stage respectively), the Bi-filtre® has a larger total filtration area with 2.5 m²/PE (1.5m² and 1 m² on the first upper and second lower stage respectively) but a foot print reduced to 1.5 m².PE-1. To favour aeration of the system, an intermediate natural aeration system is introduced at the interface between the first and second stage. The paper will present a study on a fullscale plant (Saint Michel l'Observatoire, 175 PE, France) running at full load in which different materials (sand, pozzolana of different particle size) were tested at the second stage. The aim was to identify the best materials to use to guarantee performance and avoid clogging on this unplanted and buried stage. The study consisted in measuring hydraulic conditions (inlet/outlet flows, infiltration rates, tracer experiments) correlated with 24h composite samples assessments. The results shows that such systems, if well designed, can guarantee an outlet quality of 35 mg.L-1 in SS, 125 mg.L-1 in COD, 25 mg.L-1 in BOD and 20 mg/L in KN with a total foot print of 1.5 m².PE-1. The paper will present the design recommendations and the limits of the systems taking into account a larger experience gathered on different existing plants (e.g. Chorges Bifilter®, 2 150 P.E, France). |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|