Demonstration of a Basis for Tall Wind Turbine Design, EUDP Project Final Report
| Autor: | Natarajan, Anand, Dimitrov, Nikolay Krasimirov, Madsen, Peter Hauge, Berg, Jacob, Kelly, Mark C., Larsen, Gunner Chr., Mann, Jakob, Verelst, David Robert, Dalsgaard Sørensen, John, Toft, Henrik, Abdallah, Imad, Tarp-Johansen, N.-J., Krogh, Thomas, Stærdahl, Jesper, Eriksson, Christer, Jørgensen, Erik, Klintø, Frank, Thesbjerg, Leo |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2016 |
| Předmět: | |
| Zdroj: | Natarajan, A, Dimitrov, N K, Madsen, P H, Berg, J, Kelly, M C, Larsen, G C, Mann, J, Verelst, D R, Dalsgaard Sørensen, J, Toft, H, Abdallah, I, Tarp-Johansen, N-J, Krogh, T, Stærdahl, J, Eriksson, C, Jørgensen, E, Klintø, F & Thesbjerg, L 2016, Demonstration of a Basis for Tall Wind Turbine Design, EUDP Project Final Report . DTU Wind Energy E, no. 0108, DTU Wind Energy . |
| Popis: | Wind turbine design using calibrated wind models have been proposed to be used in conjunction with load cases which lead to reduced uncertainties in the design of wind turbines with hub heights above 60m. These recommended wind profiles have been made for shear, wind directional change and turbulence. The wind turbulence models used in the loads simulations have been calibrated so that their model parameters reflect the atmospheric stability conditions and the quantile of turbulence intensity considered. Consequently large multi megawatt turbines being designed today can benefit from these more advanced wind inflow models. A revision of the IEC 61400-1standard is being developed and has incorporated some of the recommendations made from this project.This project demonstrated the impact of wind models by simulating wind turbine loads based on high frequency wind measurements taken between 100m and 200m altitude performed at Høvsøre in Denmark. The project also demonstrated the impact of the new wind models on load cases and the certification envelope of turbines. Further the project provided a detailed assessment of safety factors for IEC 61400-1 load cases using reliability-based procedures incorporating the new models and this has been made as an Annex to the new standard that is due to be issued. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|