Full Scale Test of a SSP 34m boxgirder 2:Data report
| Autor: | Jensen, Find Mølholt, Branner, Kim, Nielsen, Per Hørlyk, Berring, Peter, Antvorskov, Troels Skieller, Nielsen, Magda, Lindahl, Morten Michael, Reffs, Joan Humble, Hjuler Jensen, Peter, McGugan, Malcolm, Skamris, Carsten, Sørensen, Flemming, Schytt-Nielsen, Rune, Laursen, Jeppe H., Klein, Marcus, Stang, Henrik, Morris, Andy, Dear, John P., Puri, Amit, Fergusson, Alexander, Wedel-Heinen, Jakob |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2008 |
| Předmět: | |
| Zdroj: | Jensen, F M, Branner, K, Nielsen, P H, Berring, P, Antvorskov, T S, Nielsen, M, Lindahl, M M, Reffs, J H, Hjuler Jensen, P, McGugan, M, Skamris, C, Sørensen, F, Schytt-Nielsen, R, Laursen, J H, Klein, M, Stang, H, Morris, A, Dear, J P, Puri, A, Fergusson, A & Wedel-Heinen, J 2008, Full Scale Test of a SSP 34m boxgirder 2 : Data report . Denmark. Forskningscenter Risoe. Risoe-R, no. 1588(EN), Danmarks Tekniske Universitet, Risø Nationallaboratoriet for Bæredygtig Energi, Roskilde . |
| Popis: | This report presents the setup and result from three static full-scale tests of the reinforced glass fiber/epoxy box girder used in a 34m wind turbine blade. One test was without reinforcement one with cap reinforcement and the final test was with rib reinforcement. The cap reinforcement test was part of a proof of concept investigation for a patent. The tests were performed at the Blaest test facility in August 2007. The tests are an important part of a research project established in cooperation between Risø National Laboratory for sustainable energy – Technical university of Denmark, SSP-Technology A/S and Blaest (Blade test centre A/S) and it has been performed as a part of Find Mølholt Jensen’s PhD thesis. This report is the second data report containing the complete test data for the three full-scale tests. This report deals only with the test methods and the obtained results, no conclusions are drawn. These can be found in papers and patent referenced in the data report. Various kinds of measuring equipment have been used during these tests: acoustic emission, force transducers, strain gauges and optical deformation measuring system (DIC). The experimental investigation consisted of the following tests: 1) Flapwise bending with no reinforcement 2) Flapwise bending with wire reinforcements 3) Flapwise bending with rib reinforcements |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|