Feedback control of selective laser melting
| Autor: | Kruth, Jean-Pierre, Mercelis, Peter, Van Vaerenbergh, Jonas, Craeghs, Tom |
|---|---|
| Přispěvatelé: | Bartolo, PJ, Mateus, AJ, Batista, FDC, Almeida, HA, Matias, JM, Vasco, JC, Gaspar, JB, Correia, MA, Andre, NC, Alves, NF, Novo, PP, Martinho, PG, Carvalho, RA |
| Jazyk: | angličtina |
| Rok vydání: | 2007 |
| Předmět: | |
| Popis: | Selective Laser Melting (SLM) is a powder bed based Rapid Manufacturing (RM) process in which parts are built by selective melting of layers of powders by means of a laser source. The main advantage of this technique is the possibility of making very complex and custom made pieces in a rather fast way. In this paper a feedback control system for Selective Laser Melting is presented. A feedback control system with a highspeed CMOS camera and a photodiode has been installed on the SLM-machine developed at K.U. Leuven-PMA. Both sensors were used independently to keep the melt pool area constant, especially in the case of scanning overhanging structures in which the melt pool would become very large. First motivation for the feedback system and the outline of the feedback system will be described. Next case studies are presented, in which both the photodiode as the CMOS camera have been used to control the SLM - process. Clearly, the feedback control system can improve the surface quality of the lower surface of the overhang. © 2008 Taylor & Francis Group. Book subtitle: ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING ispartof: pages:521-527 ispartof: Proceedings of the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping pages:521-527 ispartof: 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping location:Leiria, Portugal date:24 Sep - 29 Sep 2007 status: published |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|