| Popis: |
Despite being little explored for petroporphyrins recovery from oils and bituminous shales, adsorption and desorption processes can be feasible alternatives to obtain a similar synthetic material, and to characterize their original organic materials. Experimental designs were used to analyze the effects of qualitative (e.g., type of adsorbent, solvent, and diluent) and quantitative (e.g., temperature and solid/liquid ratio) variables on the adsorptive and desorptive performance regarding nickel octaethylporphyrin (Ni-OEP) removal using carbon-based adsorbents. The evaluation variables, adsorption capacity (qe) and desorption percentage (%desorption) were optimized by means of the Differential Evolution algorithm. The most efficient adsorbent for removing/recovery Ni-OEP was activated-carbon coconut shell, in which dispersive π-π type and acid-base interactions were likely formed. The highest values of qe and %desorption were obtained using toluene as solvent, chloroform as diluent, 293 K as temperature, and 0.5 mg.mL-1 as solid/liquid ratio for adsorption, and a higher temperature (323 K) and lower solid/liquid ratio (0.2 mg.mL-1) for desorption. The optimization process resulted in qe of 6.91 mg.g-1 and %desorption of 35.2%. In the adsorption-desorption cycles, approximately 77% of the adsorbed porphyrins were recovered. The results demonstrated the potential of carbon-based materials as adsorbent materials for obtaining porphyrin compounds from oils and bituminous shales. |
