| Popis: |
Moisture transfer influences wood deformation and moisture content (MC) distribution during conventional drying of Eucalyptus urophylla wood. This study aims to investigate the effect of sample length (30, 100, and 200 mm) on moisture distribution and transfer in different directions and locations and on deformation of wood. The results showed that when the MC was above the fiber saturated point (FSP), the drying rate decreases exponentially with an increase of sample length; however, below the FSP, there was no obvious relationship between the drying rate and sample length and above the FSP, the moisture distribution was non-uniform along tangential, radial, and longitudinal directions and became even below the FSP, which was more significant in the middle location of wood. The greatest MC differences occurred between the surface and sub-central layers along the tangential and radial direction, which were between the end and sub-middle locations along the longitudinal direction. The effect of sample length on the MC distribution and MC differences along wood in the three directions depended on locations and the MC stage of wood; most of the free water and bound water transferred from the wood central to the ends along the longitudinal direction for three sets of samples. Bound water diffusion significantly slowed as the sample length exceeded 200 mm; sample length affects wood collapse and its recovery, but the drying rate has a lesser effect on collapse for samples with a length below 200 mm. |
