Research on the Relationship between Material Properties and Modeling Quality in Clay 3D Printing
| Autor: | Morimoto, Kohei |
|---|---|
| Jazyk: | japonština |
| Rok vydání: | 2023 |
| Předmět: | |
| Zdroj: | 長岡造形大学研究紀要. 20:77-84 |
| ISSN: | 1349-9033 |
| Popis: | application/pdf In this study, I investigated a simple evaluation method of material properties for modeling with a clay 3D printer and analyzed the relationship between material properties and modeling quality. In the process of clay 3D printing with different material samples, material hardness, moisture content, appearance evaluation and material shrinkage of the modeled object, and bending strength of the sample after sintering were measured. As a result, it was found that measurement using a durometer may be a valid evaluation method for clay materials. In addition, it was suggested that the strength of the 3D printed object was less deteriorated than that of a clay piece filled to the same size. The strength degradation of the modeled object due to the amount of water contained in the material was small, but the shrinkage rate in the height direction was large. This study provides preliminary findings on clay 3D printing. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|