Popis: |
When we analyze an end cutting tool statically, we must take into account a variety of factors such as heat distribution, cutting force and torque applied to the tool, wear, and vibration. The goal is to design and analyze a milling cutting tool. SolidWorks-21 was used to design the cutting tool, which in this case was an end mill tool, as well as to do the static analysis. The external loadings are as follows: The end mill cutting surface is subjected to torque of 26 N/m. One of the tool surfaces is subjected to 1250 N of force. After running the simulation in SolidWorks – 21, the lowest FOS and maximum resulting displacement were 12 and 0.0969mm, respectively. It is evident from the preceding result that the tool is less likely to break. |