Comparison of experimental and finite element analysis results of a sheet metal prototype vehicle door hinge in X, Y and Z directions
| Autor: | Onur Erol, Hande Güler Özgül |
|---|---|
| Jazyk: | angličtina |
| Rok vydání: | 2021 |
| Předmět: |
Materials science
business.industry Hinge General Physics and Astronomy UNECE R11 regulation CAD General Chemistry Structural engineering Cad model Finite element method Finite element simulation 3D scan Vehicle door hinge visual_art visual_art.visual_art_medium General Materials Science Sheet metal business |
| Zdroj: | Matéria (Rio de Janeiro) v.26 n.3 2021 Matéria (Rio de Janeiro. Online) instacron:RLAM Matéria (Rio de Janeiro), Volume: 26, Issue: 3, Article number: e13017, Published: 11 OCT 2021 |
| Popis: | In this study, the geometric differences which have a significant effect on the simulation results of the sheet metal prototype vehicle door hinge have been revealed. This geometric difference was examined by finite element simulations and experimental tests for the loads in the X, Y and Z directions specified in the UNECE R11 regulation. As a result, the curves of the finite element simulations and the experimental tests compared for each direction were examined and it was concluded that the compatible model with the experimental tests of the sheet metal prototype vehicle door hinge was 3D scan model. Keywords: Finite element simulation, UNECE R11 regulation, Vehicle door hinge, 3D scan, Cad model. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|