In vitro evaluation of the shear bond strength and bioactivity of a bioceramic cement for bonding monolithic zirconia

Autor: Eleana Kontonasaki, Athanasios E. Rigos, Maria Kokoti, Chrysoula Dandoulaki, Lambrini Papadopoulou, Vassilis Karagiannis, Petros Koidis, Georgios S. Theodorou
Rok vydání: 2019
Předmět:
Zdroj: The Journal of Prosthetic Dentistry. 122:167.e1-167.e10
ISSN: 0022-3913
DOI: 10.1016/j.prosdent.2019.04.016
Popis: Statement of problem Adhesive cementation is the most common bonding strategy for zirconia restorations. Although cementation with a bioactive luting agent has been proposed as an alternative, how the bond strength compares is unclear. Purpose The purpose of this in vitro study was to evaluate shear bond strength after cementing a monolithic zirconia ceramic to human dentin with a bioceramic cement, compare it with a traditional cement, and evaluate its bioactive properties. Material and methods A total of 120 dentin specimens and 120 yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) (BruxZir) cylindrical specimens were used. Zirconia and dentin specimens were randomly divided into 8 study groups (n=15) based on 2 luting cement types (a bioceramic cement or glass ionomer cement as control), 2 airborne-particle abrasion protocols (50 μm or 110 μm), and 2 water storage durations (24 hours or 30 days). After the shear bond strength test using a universal machine at a crosshead speed of 1 mm/min, fracture patterns were evaluated under a stereomicroscope and a scanning electron microscope. Strength values were statistically analyzed with a 3-factor ANOVA model (α=.05). Bioactivity was evaluated in simulated body fluid (SBF). Results The control glass ionomer cement achieved significantly greater shear bond strength compared with the tested bioceramic cement. Mean bond strength values ranged from 2.52 MPa to 5.23 MPa for the bioceramic cement tested and from 4.20 MPa to 6.61 MPa for the control cement. The duration of water storage played a significant role in the bond strength, with groups stored for 30 days reaching higher bond strength values, whereas the particle size of airborne-particle abrasion did not have a significant effect. Failure types were primarily mixed. No apatite formation was recorded on the surface of the specimens even after 30 days of immersion in SBF. Conclusions The evaluated cement did not develop apatite in SBF, and its bond strength values were below the control glass ionomer cement.
Databáze: OpenAIRE
Externí odkaz: