Simulator Proses Pengisian dan Pemasangan Tutup Botol Terkendali PLC Berbantuan Miniatur Konveyor
| Autor: | Arief Goeritno, Danang Adi Nugroho, Anang Dwi Purnomo |
|---|---|
| Jazyk: | indonéština |
| Rok vydání: | 2021 |
| Předmět: |
Computer science
business.industry a miniature of the conveyor machine embedded system programmable logic controller system simulator for the process of filling and installing bottle caps Programmable logic controller Ladder logic Process (computing) Information technology T58.5-58.64 Automation Systems engineering TA168 Installation Control system Bottle cap Instrumentation (computer programming) business Computer hardware Miniatur mesin konveyor sistem tertanam sistem pengontrol logika terprogram proses pengisian dan pemasangan tutup botol |
| Zdroj: | Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi), Vol 5, Iss 4, Pp 774-782 (2021) Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi); Vol 5 No 4 (2021): Agustus 2021; 774-782 Jurnal RESTI (Rekayasa Sistem dan Teknologi Informasi); Vol 5 No 4 (2021): Agustus 2021 ; 774-782 |
| ISSN: | 2580-0760 |
| Popis: | A miniature conveyor machine assisted by embedded systems and controlled by a programmable logic controller (PLC) has been fabricated with the operating mechanism is based on the detection of two different colors. The objectives of this research are to obtain a miniature machine is controlled by the PLC system, create a ladder diagram-based program structure, and measure the performance of the embedded system. Obtaining the machine is carried out through assembly of the conveyor frame, installation of all devices, and integrated wiring. The programming for the Omron PLC system is based on providing the CX-Programmer 64 bits, establishing algorithms and compiling ladder diagrams, and compiling and uploading processes. The performance measurement includes synchronization conditions between the simulator and the control system, observations of the readings of installed sensors for activating all devices on the output side, and observing the measurement of the filling process time and the installation of bottle caps assisted by the pneumatic system. The results of the performance during the process of filling and installing the lid obtained a success rate of 75%, based on four trials, three successes, and one failure. The general conclusion is that the embedded system that has been built can be used as a simulator for the mechanism of filling liquid into bottles and installing bottle caps, and it is as an implementation of instrumentation and automation processes. Telah dihasilkan sebuah miniatur mesin konveyor berbantuan sistem tertanam terkendali oleh programmable logic controller (PLC) dengan mekanisme operasi mesin berdasarkan kepada deteksi terhadap dua warna berbeda. Tujuan penelitian ini berupa memperoleh sebuah miniatur mesin terkendali oleh sistem PLC, membuat struktur program berbasis ladder diagram, dan mengukur kinerja sistem tertanam. Perolehan mesin dilakukan melalui perakitan kerangka konveyor, pemasangan seluruh perangkat, dan pengawatan terintegrasi. Metode pemrograman terhadap sistem PLC Omron didasarkan kepada penyediaan CX Programmer 64 bit, penetapan algoritma dan penyusunan ladder diagram, dan proses compiling dan uploading. Pengukuran kinerja meliputi kondisi sinkronisasi antara simulator dan sistem kontrol, pengamatan terhadap pembacaan sensor-sensor terpasang untuk pengaktifan seluruh perangkat di sisi keluaran, dan pengamatan terhadap pengukuran waktu proses pengisian dan pemasangan tutup botol berbantuan sistem pneumatic. Hasil kinerja saat proses pengisian dan pemasangan tutup diperoleh tingkat keberhasilan sebesar 75%, berdasarkan empat kali uji coba, tiga kali berhasil dan satu kali gagal. Kesimpulan secara umum, bahwa sistem tertanam yang telah dibangun dapat digunakan sebagai simulator untuk mekanisme pengisian cairan ke dalam botol dan pemasangan tutup botol, dan hal itu sebagai implementasi terhadap instrumentasi dan proses otomasi. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|